– Multiplexer (filter and priority) the NMEA 0183 sentences
– Convert the most common NMEA 0183 sentences into NMEA 2000 and vice-versa.
– Filter for sentences from NMEA 0183 to 2000 and vice-versa
– 4 in and 1 out ports NMEA 0183, optoisolate (4Kv rms) 1 RS232(common to NMEA 0183, RS422 in/out), baud rate configurable
– 1 Port NMEA 2000 (with power)
– 1 channel in/out digital (Raymarine wind Sensor st60/70)
– 3 channels in/out analogue (Raymarine wind sensor, B&G wind sensor, 1 power input 8V)
– Internal 10Hz GPS included
– Wi-Fi 802.11 b/g (access point and client) with selectable channel by user.
– Slot Micro SD (for log record and setting files)
– Processor PIC32 32bit, 512KB flash + 12KB for boot, 128KB RAM
– Alimentation 9 – 36V DC (voltage nominal 12-24V DC)
– Consumption: 1,5W nominal, 5W max
– IP 54, PCB tropicalized
– 1 LED power ON, 1 LED status Wi-Fi, 1 LED overflow
– Reset button
– Certification CE
– Configuration sw for PC and Mac
– Free iOS application ASTRA Dongle Recorder for record and manage log files
– Free firmware updates
USER SETTINGS available via iOS app and Esa d7
–Damping level for: Boat Speed; Heading; Apparent Wind Angle; Apparent Wind Speed; Speed Over Ground; Course Over Ground.
– Wind sensor source selectable. (Calibration available for Raymarine st60/70.
– AWA offset available
– TWA and TWS Correction Tables
– Boat Speed Sensor source selectable (GPS/NMEA). BS Gain adjustable when NMEA source selected.
– Depth Offset
– HDG Sensor source selectable (GPS/NMEA). HDG offset adjustable when NMEA source selected